Run Mode Setting - Toshiba nv Series Instruction Manual

E.2.5 Run mode setting
Important
 For details on operation status such as RUN and HALT, refer to the FL654 Instruction Manual.
 The FL654 module cannot be activated depending on the type of operation status. Be sure to
check the effects on the system before changing the operation status.
You can check the operation status from [Station Status] on the system view. To
change the operation status, select the target FL654 module, and select [Run
Mode] from the [Tool] menu. (You can also activate it by clicking the [Run Mode]
button.)
The [Set Run Mode] dialog box is displayed.
To change the operation status, push the button for the desired mode in the [Set
Run Mode] dialog box.
The request for changing the operation status to the specified status is executed.
After the request is executed, make sure that the operation status is changed over
to the desired status.
Unified Controller nv series FL-net (FL911) Module Instruction Manual
E.2 System View
99