series Robot Controller
Display Item
IP ADDRESS
SUBNET MASK
MAC ADDRESS
FIRMWARE
Displayed Data (2)
Item
Channel
OwnPort
Connect IP
Port
Step 2: Switching the Ethernet information at the connection destination
Press the [L/R ] or [NEXT] key.
Each time the key is pressed, the Ethernet information display items at the connection
destination change.
IP address of the robot controller itself that is written in the
"ETHERNET. PAR" [E01] file
Subnet mask of the network that is written in the "ETHERNET.
PAR" [E03] file
MAC address of the robot controller itself that is written in the
"ETHERNET. PAR" [E03] file
Version of the Ethernet unit firmware
Indicates the Ethernet channel numbers from IP0 to IP3.
Robot port number
IP address of the other connected device
Port number of the other connected device
– 11-37 –
TP3000 OPERATOR'S MANUAL
Description
Description
STE 85412