Toshiba TS3000 Series Instruction Manual page 68

series Robot Controller
TP3000
Step 3: Specify File
A list of the program files in the controller is displayed on the screen.
To select an existing file, select the desired file with the up and down cursor keys and
then press the [EXE] key.
The program editor starts.
Step 4: Creation of a new file
To create a new file, press the [NEW] key.
Enter the desired file name on the command line.
Once the file name has been determined, press the [EXE] key.
The program editor starts.
STE 85412
4-2