A1Xxyyyy Service Processor Srcs - IBM PS703 Service Manual

A1xxyyyy service processor SRCs

An A1xxyyyy system reference code (SRC) is an attention code that offers information about a platform
or service processor dump or confirms a control panel function request. Take the steps in the Action
column only if the BladeSystem appears to hang on an attention code.
Table 12 shows A1xxyyyy SRCs.
Table 12. A1xxyyyy service processor SRCs
Attention code Description
A1xxyyyy Attention code
A2xxyyyy Logical partition SRCs
An A2xxyyyy SRC is a logical partition reference code that is related to logical partitioning.
Table 13. A2xxyyyy Logical partition SRCs
Reference Code Description
A2xxyyyy See the description for the B200yyyy error
code with the same yyyy value.
A2D03000 User-initiated immediate termination and MSD
of a partition.
A2D03001 User-initiated RSCDUMP of RPA partition's
PFW content.
A2D03002 User-initiated RSCDUMP of IBM i partition's
SLIC bootloader and PFW content.
A700yyyy Licensed internal code SRCs
An A700xxxx system reference code (SRC) is an error/event code that is related to licensed internal code.
Table 14. A700yyyy Licensed internal code SRCs
Reference Code Description
A700173C Informational system log entry only.
A7003000 A user-initiated platform dump occurred.
A7004700 Informational system log entry only.
A7004712 A problem occurred when initializing, reading,
or using system VPD.
A7004713 A problem occurred when initializing, reading,
or using system VPD.
A7004715 A problem occurred when initializing, reading,
or using system VPD.
36
Power Systems: Problem Determination and Service Guide for the IBM PS703 (7891-73X) and PS704 (7891-74X)
Action
1. Go to "Checkout procedure" on page 176.
2. Replace the system board and chassis
assembly, as described in "Replacing the
FRU system-board and chassis assembly" on
page 264.
Action
Perform the action described in the B200yyyy
error code with the same yyyy value.
No corrective action is required.
No corrective action is required.
No corrective action is required.
Action
No corrective action is required.
No service action required.
No corrective action is required.
Replace the management card, as described in
"Removing the tier 2 management card" on
page 262 and "Installing the tier 2 management
card" on page 263.
Replace the management card, as described in
"Removing the tier 2 management card" on
page 262 and "Installing the tier 2 management
card" on page 263.
Replace the management card, as described in
"Removing the tier 2 management card" on
page 262 and "Installing the tier 2 management
card" on page 263.