IBM PS703 Service Manual page 124

Table 21. C2001000 to C20082FF checkpoints (continued)
v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v See Chapter 3, "Parts listing, type 7891," on page 225 to determine which components are CRUs and which
components are FRUs.
Progress code
C2006030
C2006040
C2006050
C2006060
C2006100
C2006200
C20062FF
C2008040
112
Power Systems: Problem Determination and Service Guide for the IBM PS703 (7891-73X) and PS704 (7891-74X)
Description
Priming LP configuration LID
Preparing to initiate LID load from load
source
LP configuration LID primed
successfully
Waiting for LID load to complete
LID load completed successfully
Loading raw kernel memory image
Loading raw kernel memory image
completed successfully
Begin transfer slot locks to partition
Action
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.