Table of Contents
Advertisement
Table 18. BA000010 to BA400002 Partition firmware SRCs (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v See Chapter 3, "Parts listing, type 7891," on page 225 to determine which components are CRUs and which
components are FRUs.
Error code
BA010007
BA010008
BA010009
BA01000A
BA01000B
BA01000C
66
Power Systems: Problem Determination and Service Guide for the IBM PS703 (7891-73X) and PS704 (7891-74X)
Description
The device does not have the required
device_type property.
The device_type property for this device
is not supported by the iSCSI initiator
configuration specification.
The arguments specified for the ping
function are invalid.
The itname parameter string exceeds the
maximum length allowed.
The ichapid parameter string exceeds
the maximum length allowed.
The ichappw parameter string exceeds
the maximum length allowed.
Action
1. Reboot the blade server.
2. If the problem persists:
a. Go to "Checkout procedure" on page
176.
b. Replace the system-board, as described
in "Replacing the FRU system-board
and chassis assembly" on page 264.
1. Reboot the blade server.
2. If the problem persists:
a. Go to "Checkout procedure" on page
176.
b. Replace the system-board, as described
in "Replacing the FRU system-board
and chassis assembly" on page 264.
The embedded host Ethernet adapters (HEAs)
help provide iSCSI, which is supported by
iSCSI software device drivers on either AIX or
Linux. Verify that all of the iSCSI configuration
arguments on the operating system comply
with the configuration for the iSCSI Host Bus
Adapter (HBA), which is the iSCSI initiator.
The embedded host Ethernet adapters (HEAs)
help provide iSCSI, which is supported by
iSCSI software device drivers on either AIX or
Linux. Verify that all of the iSCSI configuration
arguments on the operating system comply
with the configuration for the iSCSI Host Bus
Adapter (HBA), which is the iSCSI initiator.
The embedded host Ethernet adapters (HEAs)
help provide iSCSI, which is supported by
iSCSI software device drivers on either AIX or
Linux. Verify that all of the iSCSI configuration
arguments on the operating system comply
with the configuration for the iSCSI Host Bus
Adapter (HBA), which is the iSCSI initiator.
The embedded host Ethernet adapters (HEAs)
help provide iSCSI, which is supported by
iSCSI software device drivers on either AIX or
Linux. Verify that all of the iSCSI configuration
arguments on the operating system comply
with the configuration for the iSCSI Host Bus
Adapter (HBA), which is the iSCSI initiator.
Advertisement
Table of Contents
