Table of Contents
Advertisement
System-board connectors
Blade server components attach to the connectors on the system board.
The following figure shows the connectors on the base-unit system board in the PS703 blade server.
Figure 4. PS703 system-board connectors
The following table identifies and describes the connectors for the PS703 blade server.
Table 3. PS703 connectors
Callout
PS703 blade server connectors
1
Operator panel connector
2
DIMM connectors (See Figure 7 on page 11 for individual connectors.)
3
3 V lithium battery connector (P1-E1)
4
Management card connector (P1-C17)
5
2.5" SAS HDD (P1-D1) or 1.8" SATA SSD (P1-C18, P1-C18-D1, P1-C18-D2) carrier
6
CIOv expansion card connector (P1-C19)
7
High-speed (CFFh) expansion card connector (P1-C20)
The following figure shows the connectors on the base-unit system board in the PS704 blade server.
9
Chapter 1. Introduction
Advertisement
Table of Contents
