IBM PS703 Service Manual page 120

Table 21. C2001000 to C20082FF checkpoints (continued)
v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v See Chapter 3, "Parts listing, type 7891," on page 225 to determine which components are CRUs and which
components are FRUs.
Progress code
C20014FF
C2002100
C2002110
C200211F
C20021FF
C2002200
C20022FF
C2002300
108
Power Systems: Problem Determination and Service Guide for the IBM PS703 (7891-73X) and PS704 (7891-74X)
Description
Startup parameters initialized
successfully
Power on racks
Issuing a power on command
Power on command successful
Power on phase complete
Begin acquiring slot locks
End acquiring slot locks
Begin acquiring VIO slot locks
Action
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Recovering the system firmware" on
page 217.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.