IBM PS703 Service Manual page 140

Table 23. CA000000 to CA2799FF checkpoints (continued)
v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v See Chapter 3, "Parts listing, type 7891," on page 225 to determine which components are CRUs and which
components are FRUs.
Progress code
CA00E1F4
CA00E1F5
CA00E1F6
CA00E1F7
CA00E1F8
CA00E1F9
CA00E1FA
CA00E1FB
CA00E1FC
CA00E1FE
CA00E1FF
128
Power Systems: Problem Determination and Service Guide for the IBM PS703 (7891-73X) and PS704 (7891-74X)
Description
End self-test sequence on one or more
boot devices; begin system management
services
Build boot device list
Determine boot device sequence
No boot image located
Build boot device list for SCSD adapters.
(The location code of the SCSD adapter
being scanned is also displayed.)
Build boot device list for fibre-channel
adapters. (The location code of the SAN
adapter being scanned is also
displayed.)
Building device list for SCSD adapters.
(The device ID and device LUN of the
device being scanned is also displayed.)
Scan SCSD bus for attached devices
Build boot device list for SSA adapters.
(The location code of the SSA adapter
being scanned is also displayed.)
Building device list for fibre-channel
(SAN) adapters. (The WWPN of the
SAN adapter being scanned is also
displayed.)
Build device list for fibre-channel (SAN)
adapters. (The LUN of the SAN adapter
being scanned is also displayed.)
Action
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
Go to "Boot problem resolution" on page 182.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.
1. Go to "Checkout procedure" on page 176.
2. Replace the system-board, as described in
"Replacing the FRU system-board and
chassis assembly" on page 264.