IBM PS703 Service Manual page 187

Table 31. Failing function codes (continued)
FFC Description and notes
820 System-board and chassis assembly (interprocessor related testing problem)
887 System-board and chassis assembly (integrated Ethernet adapter)
893 LAN adapter
D01 System-board and chassis assembly (cache problem)
E19 System-board and chassis assembly (power supply sensor failed)
2506 3Gb SAS pass-through expansion card
2506-101
2506-710
2506-713
2506-720
252B System-board and chassis assembly (SAS controller)
2567 System-board and chassis assembly (USB integrated adapter)
25A0 System-board and chassis assembly
25C4 Broadcom Ethernet adapter
2607 Emulex 8 Gb Fibre Channel expansion card (CIOv)
2624 4x InfiniBand DDR expansion card (CFFh)
2625 4x InfiniBand QDR expansion card (CFFh)
2631 System-board and chassis assembly
268B 300 GB SAS small form factor disk drive
26B4 200 GB solid-state drive
26BD Solid-state drive carrier (holds up to two solid-state drives)
26D2 600 GB SAS small form factor disk drive
2D02 System-board and chassis assembly (generic USB reference to controller/adapter)
2E00 QLogic 4 Gb Fibre Channel and Broadcom 1 Gb Ethernet expansion card (CFFh)
2E10 QLogic 4 Gb Fibre Channel and Broadcom 1 Gb Ethernet expansion card (CFFh)
2E13 QLogic 4 Gb Fibre Channel expansion card (CIOv)
2E14 QLogic 8 Gb Fibre Channel expansion card (CIOv)
2E15 QLogic 8 Gb and Broadcom 1 Gb Ethernet expansion card (CFFh)
2E21 QLogic 10 Gb FCoCEE daughtercard
2E23 QLogic 10 Gb FCoCEE daughtercard
2E33 Broadcom 4 port 1 Gb Ethernet expansion card (CFFh)
2E34 Broadcom 2 port 1 Gb Ethernet expansion card (CIOv)
2E35 QLogic 8 Gb Fibre Channel and 1 Gb Ethernet expansion card (CFFh)
2E36 System-board and chassis assembly (integrated Ethernet adapter)
Adapter configuration error indicated by test failures. Reconfigure the adapter. If the
problem persists, replace the adapter.
Error log analysis reveals a permanent controller failure. Replace the adapter.
Error log analysis reveals a controller failure. Replace the adapter.
Error log analysis reveals a controller device bus configuration error. Replace the
adapter. If the problem persists, replace the system board and chassis assembly.
175
Chapter 2. Diagnostics