IBM PS703 Service Manual page 50

Table 15. AA00E1A8 to AA260005 Partition firmware attention codes (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v See Chapter 3, "Parts listing, type 7891," on page 225 to determine which components are CRUs and which
components are FRUs.
Attention code
AA00E1B1
AA060007
AA06000B
AA06000C
AA06000D
AA06000E
38
Power Systems: Problem Determination and Service Guide for the IBM PS703 (7891-73X) and PS704 (7891-74X)
Description
Waiting for the user to accept or decline
the license
A keyboard was not found.
The system or partition was not able to
find an operating system on any of the
devices in the boot list.
The media in a device in the boot list
was not bootable.
The media in the device in the bootlist
was not found under the I/O adapter
specified by the bootlist.
The adapter specified in the boot list is
not present or is not functioning.
Action
1. Check for server firmware updates.
2. Apply any available updates.
3. If the problem persists:
a. Go to "Checkout procedure" on page
176.
b. Replace the system-board, as described
in "Replacing the FRU system-board
and chassis assembly" on page 264.
Verify that a keyboard is attached to the USB
port that is assigned to the partition.
1. Use the SMS menus to modify the boot list
so that it includes devices that have a
known-good operating system and restart
the blade server.
2. If the problem remains, go to "Boot
problem resolution" on page 182.
1. Replace the media in the device with
known-good media or modify the boot list
to boot from another bootable device.
2. If the problem remains, go to "Boot
problem resolution" on page 182.
1. Verify that the media from which you are
trying to boot is bootable or modify the
boot list to boot from another bootable
device.
2. If the problem remains, go to "Boot
problem resolution" on page 182.
v For an AIX operating system:
1. Try booting the blade server from
another bootable device; then, run AIX
online diagnostics against the failing
adapter.
2. If AIX cannot be booted from another
device, boot the blade server using the
stand-alone diagnostics CD or a NIM
server; then, run diagnostics against the
failing adapter.
v For a Linux operating system, boot the blade
server using the stand-alone diagnostics CD
or a NIM server; then, run diagnostics
against the failing adapter.