Table of Contents
Advertisement
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v See Chapter 3, "Parts listing, type 7891," on page 225 to determine which components are CRUs and which
components are FRUs.
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Isolation
Symptom
Procedure Code
FSPSP09
A problem has been
detected with a
memory DIMM, but
it cannot be isolated
to a specific memory
DIMM.
Action
Replace the CRU called out after this FSPSP call. If the CRU that is called
out is a DIMM CRU, perform the following procedure:
1. Replace both memory DIMMs of the pair on the microprocessor that
contains the failing CRU:
DIMM 1 (Px-C1)
For P1-C1, replace DIMMs 1 and 3; for P2-C1, replace DIMMs
17 and 19.
DIMM 2 (Px-C2)
Replace DIMMs 2 and 4, or DIMMs 18 and 20.
DIMM 3 (Px-C3)
Replace DIMMs 1 and 3, or DIMMs 17 and 19.
DIMM 4 (Px-C4)
Replace DIMMs 2 and 4, or DIMMs 18 and 20.
DIMM 5 (Px-C5)
Replace DIMMs 5 and 7, or DIMMs 21 and 23.
DIMM 6 (Px-C6)
Replace DIMMs 6 and 8, or DIMMs 22 and 24.
DIMM 7 (Px-C7)
Replace DIMMs 5 and 7, or DIMMs 21 and 23.
DIMM 8 (Px-C8)
Replace DIMMs 6 and 8, or DIMMs 22 and 24.
DIMM 9 (Px-C9)
Replace DIMMs 9 and 11, or DIMMs 25 and 27.
DIMM 10 (Px-C10)
Replace DIMMs 10 and 12, or DIMMs 26 and 28.
DIMM 11 (Px-C11)
Replace DIMMs 9 and 11, or DIMMs 25 and 27.
DIMM 12 (Px-C12)
Replace DIMMs 10 and 12, or DIMMs 26 and 28.
DIMM 13 (Px-C13)
Replace DIMMs 13 and 15, or DIMMs 29 and 31.
DIMM 14 (Px-C14)
Replace DIMMs 14 and 16, or DIMMs 30 and 32.
DIMM 15 (Px-C15)
Replace DIMMs 13 and 15, or DIMMs 29 and 31.
DIMM 16 (Px-C16)
Replace DIMMs 14 and 16, or DIMMs 30 and 32.
2. See "Removing a memory module" on page 249 for location
information and the removal procedure.
3. Install new memory DIMMs, as described in "Installing a memory
module" on page 251.
197
Chapter 2. Diagnostics
Advertisement
Table of Contents
