Table of Contents
Advertisement
Figure 34. DIMM connectors for the PS703
Figure 35. DIMM connectors for the PS704
Attention: To avoid breaking the DIMM retaining clips or damaging the DIMM connectors, open
and close the clips gently.
6. Carefully open the retaining clips on each end of the DIMM connector and remove the DIMM.
Note: When replacing DIMM 16 in the PS703 server and DIMM 16 or DIMM 32 in the PS704 server,
and if a combination form factor horizontal card (CFFh) is present, lift the blue cam mechanism so
that you can maneuver your finger under the blue tab and open the retaining clip.
250
Power Systems: Problem Determination and Service Guide for the IBM PS703 (7891-73X) and PS704 (7891-74X)
Advertisement
Table of Contents
