IBM PS703 Service Manual page 163

Table 27. 101-711 through FFC-725 SRNs (continued)
SRN FFC
2607-xxx 2607
2607-102 2607
2607-103 2607
2607-104 2607
2607-105 2607
2607-106 2607
2607-108 2607 221
2607-110 2607
2607-201 2607 221
2607-203 2607
2607-204 2607 221
2607-205 2607 221
2607-701 2607
2607-703 2607
2607-704 2607
2607-705 2607
2607-706 2607
2624-xxx 2624
2624-101 2624
2624-102 2624
2624-103 2624
Description and Action
Generic reference for 8Gb PCIe Fibre Channel Expansion Card. Go to "Performing the
checkout procedure" on page 177.
Reset Test failure for the Fibre Channel adapter card. Replace the 8Gb PCIe Fibre
Channel Expansion Card.
Register Test failure for the Fibre Channel adapter card. Replace the 8Gb PCIe Fibre
Channel Expansion Card.
SRAM Test failure for the Fibre Channel adapter card. Replace the 8Gb PCIe Fibre
Channel Expansion Card.
Internal Wrap Test failure for the Fibre Channel adapter card. Replace the 8Gb PCIe
Fibre Channel Expansion Card.
Gigabit Link Module (GLM) Wrap Test failure for the Fibre Channel adapter card.
Replace the 8Gb PCIe Fibre Channel Expansion Card.
Enhanced Error Handling Failure on the bus for the Fibre Channel adapter card. Go to
"Performing the checkout procedure" on page 177.
Enhanced Error Handling Failure on the Fibre Channel adapter card. Replace the 8Gb
PCIe Fibre Channel Expansion Card.
Configuration Register Test Failure for the Fibre Channel adapter card. Go to
"Performing the checkout procedure" on page 177.
PCI Wrap Test Failure for the Fibre Channel adapter card. Replace the 8Gb PCIe Fibre
Channel Expansion Card.
DMA Test Failure for the Fibre Channel adapter card. Go to "Performing the checkout
procedure" on page 177.
Error on Read/Write Operation for the Fibre Channel adapter card. Go to "Performing
the checkout procedure" on page 177.
Error Log Analysis indicates that the adapter self-test failed for the Fibre Channel
adapter card. Go to "Performing the checkout procedure" on page 177.
Error Log Analysis indicates that an unknown adapter error has occurred for the Fibre
Channel adapter card. Go to "Performing the checkout procedure" on page 177.
Error Log Analysis indicates that an adapter error has occurred for the Fibre Channel
adapter card. Go to "Performing the checkout procedure" on page 177.
Error Log Analysis indicates that a parity error has been detected for the Fibre Channel
adapter card.
The adapter must be replaced immediately. Failure to do so could result in data being
read or written incorrectly.
Error Log Analysis indicates that a fatal hardware error has occurred for the Fibre
Channel adapter card.
This adapter was successfully taken off-line. It will remain off-line until reconfigured or
the system is rebooted. This adapter must be replaced and not brought back on-line.
Failure to adhere to this action could result in data being read or written incorrectly or
in the loss of data.
Generic reference for 4X PCI-E DDR InfiniBand Host Channel Adapter. Go to
"Performing the checkout procedure" on page 177.
Configuration failure. Replace the 4X PCI-E DDR InfiniBand Host Channel Adapter.
Queue pair create failure. Replace the 4X PCI-E DDR InfiniBand Host Channel
Adapter.
Loop back test failure. Replace the 4X PCI-E DDR InfiniBand Host Channel Adapter.
151
Chapter 2. Diagnostics