Updating The Firmware Using The Single Mode - Agilent Technologies InfinityLab LC Series User Manual

5 Maintenance and Repair
Firmware Updates

Updating the Firmware Using The Single Mode

Only one firmware revision (set) should be stored on the USB Flash Drive. If more
NOTE
than one firmware version for a module is available, the Instant Pilot always
takes the most recent firmware version. In this case, delete those versions not
required.
Module may become unusable
C AU T I O N

1 To open the Maintenance - System information, press More from the
2 Move the curser to the module you want to update.
G4208A User's Guide
Do not disconnect the Instant Pilot or the USB Flash Drive while a firmware
update is running.
Welcome screen and select Maintenance.
Figure 91 Firmware Update Screen - Simple Mode
Immediately updates a
selected module or system
USB Flash Drive must be
active
138