Usb Flash Drive Not Recognized; Instant Pilot Not Recognized By Firmware Update Tool; Contact Agilent - Agilent Technologies InfinityLab LC Series User Manual

5 Maintenance and Repair
Troubleshooting

USB Flash Drive not recognized

Since USB Flash Drives may vary from vendor to vendor or from type to type,
NOTE
incompatibilities can occur. In general, USB Flash Drives from Sandisk and
Kingston should work. The USB Flash Drive must be FAT-16 formatted and
without encryption. See
page 58 and

Instant Pilot not recognized by Firmware Update Tool

If the Instant Pilot is in "Backward compatible mode ON", see
NOTE
Control Software"
In this case reconfigure the Instant Pilot to "Backward compatible mode OFF".

Contact Agilent

If you experience other problems, please contact your local Agilent support
provider for help.
G4208A User's Guide
"Handling of Unsupported USB Flash Drive Formats"
Table 14 on page 152.
on page 106, it will not be seen by the Firmware Update Tool.
on
"With 3rd Party
151