Agilent Technologies InfinityLab LC Series User Manual page 75

2 Working with the Instant Pilot
Working with Methods
1 Press File and select the Save as.
2 Choose the location (internal = Instant Pilot or USB = USB Flash Drive) and a
3 You may delete or copy methods from one location to the other.
4 You may protect/un- protect a method (see
The stored method now contains all the current LC system and module settings.
If you disconnect the Instant Pilot from one LC system and connect it to another
LC system, the Instant Pilot's current method will get an (*) or (#) because its
settings vary from the settings of the new LC system.
To transfer methods from one LC system to another you can use the Instant Pilot
or a USB Flash Drive.
G4208A User's Guide
Figure 50 Method - Save As
name (if not already done).
and "Method File Protection"
"Method Properties"
on page 72).
on page 71
75