Agilent Technologies InfinityLab LC Series User Manual page 31

1 Start-up Information
Getting Started
7 Select Next to view LAN settings.
8 Select Modify to change LAN settings.
G4208A User's Guide
The next screen shows the LAN settings of an additional MIO card that has
been identified in the system (may not been connected to LAN).
Figure 12 Getting Started - Setup Wizard - LAN settings
The next screen shows the actual LAN settings used for communication with
the system/module.
Figure 13 Getting Started - Setup Wizard - LAN setup
allows modifications of the
settings. For parameters,
refer to the installed LAN
card's documentation.
to change the settings
move to the line and press
OK to edit the settings.
Then press Done to write
down the new values.
closes the setup
31