Safety Information; Safety Symbols - Agilent Technologies InfinityLab LC Series User Manual

6 Appendix

Safety Information

Safety Information

The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this manual violates safety
standards of design, manufacture, and intended use of the instrument. Agilent
Technologies assumes no liability for the customer's failure to comply with these
requirements.

Safety Symbols

Table 15
A WARNING
WAR N IN G
alerts you to situations that could cause physical injury or death.

A CAUTION
C AU T I O N
alerts you to situations that could cause loss of data, or damage of equipment.

G4208A User's Guide
Symbols
The apparatus is marked with this symbol when the user shall refer to the
instruction manual in order to protect risk of harm to the operator and to
protect the apparatus against damage.
Indicates dangerous voltages.
Do not proceed beyond a warning until you have fully understood and
met the indicated conditions.
Do not proceed beyond a caution until you have fully understood and met
the indicated conditions.
158