Selecting A Signal - Agilent Technologies InfinityLab LC Series User Manual

3 Running an Isocratic Analysis

Selecting a Signal

Selecting a Signal

1 Setup the signal parameters in the Method Information screen.
2 Select Status in the Welcome screen.
3 Press Plot.
4 Press Setup.
5 Choose a Detector Signal from the Available Signals list.
You can choose several signals at a time. The plot function will display all signals
NOTE
that are shown in the Selected Signals list box. Use the selection keys to navigate
within the list box and select the signal(s).
6 Press Done.
G4208A User's Guide 114