Observing The Chromatogram - Agilent Technologies InfinityLab LC Series User Manual

3 Running an Isocratic Analysis

Observing the Chromatogram

Observing the Chromatogram

1 Select the Status screen.
2 Press Start.
3 Select Continue to confirm the start of the analysis.
4 If the system is not ready (yellow), you have to press Continue again.
5 Change to the Status screen (if started from here, the plot will be active after
6 Press Plot to show the chromatogram
A typical chromatogram for this analysis is shown in
Figure 79
The exact profile of the chromatogram depends on the column you have used.
Differences in retention times and areas of the peaks in your chromatogram and
the one shown in
concentration of the sample from batch to batch, the quality of the solvents used
and the column temperature.
You can rescale the plot using Rescale, or the cursor keys or you define the plot
NOTE
window within the Setup (see also
G4208A User's Guide
The modules automatically get ready and start the analysis.
start).
Analysis of Isocratic Standard Sample
Figure 79 on page 115 might be a result of variations in the
Figure 73 on page 97).
Figure 79 on page 115.
115