Agilent Technologies InfinityLab LC Series User Manual page 9

1 Start-up Information
Instant Pilot Features
•
•
•
•
•
•
•
•
•
Firmware revision A.05.13/14 does not run on Instant Pilot modules with serial
NOTE
numbers starting with MY due to new flash ROM type that does not allow
downgrades to B.02.07 and below. This was fixed with firmware A.05.15 and
B.02.15.
G4208A User's Guide
Protect your method from any inadvertent keyboard changes by setting
method file protection.
Use USB Flash Drive to store and transfer methods and sequences between
Agilent systems.
Monitor all operations and error events using the self- updating logbooks.
Use the context- sensitive online information system to get further
information on all topics.
To help comply with Good Laboratory Practice (GLP) regulations, select a
variety of module tests that will check the performance of the LC system.
Use the early maintenance feedback (EMF) limits for scheduling maintenance
work.
Display data graphically using the Plot screen, where as many as four
different signals can be monitored at the same time.
Printing to an USB Flash Drive.
Version A.05.15 is compatible with 1100/1200 modules that run on firmware
A.05.11/13 and A.05.09/10 (introduced November 2006).
9