Updating The Firmware Using The Wizard - Agilent Technologies InfinityLab LC Series User Manual

5 Maintenance and Repair
Firmware Updates

Updating the Firmware Using The Wizard

Only one firmware revision (set) should be stored on the USB Flash Drive. If more
NOTE
than one firmware version for a module is available, the Instant Pilot will always
take the most recent firmware version. In this case, delete those versions not
required.
Module may become unusable
C AU T I O N

1 To open the Maintenance - System information, press More from the
2 Press Update Wizard and then Cont., or Abort to cancel the update process.
G4208A User's Guide
Do not disconnect the Instant Pilot or the USB Flash Drive while a firmware
update is running.
Welcome screen and select Maintenance.
Figure 94 Firmware Update Screen - Update Wizard
The Update Wizard allows you to define the modules to be updated. This
screen also shows the installed firmware revision versus the available.
Update Wizard allows
selected updates
USB Flash Drive must be
active
140