Agilent Technologies InfinityLab LC Series User Manual page 128

4 Running Multiple-Vial Analyses
Re-calibrating With Multiple Groups of Standards
13 Change the settings according to
14 You may press Preview to view the result.
15 Select Done to accept entries.
16 Press Start and confirm the start of the sequence.
The autosampler now analyzes:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
G4208A User's Guide
Figure 85 Sequence Calibration Wizard
three type A calibration standards in duplicate,
type A samples in vials 7 and 8,
three type A calibration standards in duplicate,
type A samples in vials 9 and 10,
three type A calibration standards in duplicate,
type A samples in vials 11 to 12,
three type A calibration standards in duplicate,
three type B calibration standards in duplicate,
type B samples in vials 13, 14 and 15,
three type B calibration standards in duplicate,
type B samples in vials 16,17 and 18,
three type B calibration standards in duplicate,
type B samples in vials 19, 20 and 21, and
three type B calibration standards in duplicate.
Figure 85 on page 128.
128