Agilent Technologies InfinityLab LC Series User Manual page 137

5 Maintenance and Repair
Firmware Updates
Table 13 Firmware Update Tools
Update via Module
Instant Pilot G4208A
1100/1200/1260/1290 HPLC
Modules
The installation of older firmware might be necessary:
•
•
To upgrade/downgrade the firmware,
1 Download the firmware and the documentation from the Agilent web
Use one of the above mentioned update tools, see
NOTE
tools are also available via the above-mentioned Agilent web.
If the Instant Pilot is in "Backward compatible mode ON", see
NOTE
Control Software"
In this case reconfigure the Instant Pilot to "Backward compatible mode OFF".
2 Load the firmware into the module(s) as described in
G4208A User's Guide
Instant Pilot G4208A
USB Flash Drive
USB Flash Drive plus CAN
cable
to keep all systems on the same (validated) revision, or
if third- party control software requires a special version.
http://www.agilent.com/en-us/firmwareDownload?whid=69761
on page 106, it will not be seen by the Firmware Update Tool.
Using The Single Mode"
Wizard" on page 140.
LAN/RS-232 Update Tool
2.10 and a PC with LAN or
RS-232
via the HPLC system plus
CAN
requires LAN / RS-232 plus
CAN cable
on page 138 or "Updating the Firmware Using The
Lab Advisor B.02.06 and
above and a PC with
LAN/RS-232/USB
via the HPLC system plus
CAN
requires LAN / RS-232/USB
plus CAN cable
Table 13 on page 137. The
"With 3rd Party
"Updating the Firmware
137