Table of Contents
Advertisement
Using OXIMAX Sensor Event Records
O
M
Sensor Event Record Data Available
XI
AX
90
When an O
M
sensor containing patient alarm data
XI
AX
(single-patient-use O
M
XI
the Sensor Event Record indicator on the monitor front panel blinks
at a medium priority flash rate to indicate that the O
attached to the monitor contains patient event data. The LED blinks
for approximately 60 seconds or until the O
disconnected or until the sensor trend data is displayed by pressing
TREND, then SENSOR.
A corresponding "DATA IN SENSOR" message is also displayed at
the bottom of the display. After 4 to 6 seconds, if all the data has been
read from the O
M
sensor, the message is replaced with the main
XI
AX
menu.
If data is still being read from the O
the DATA IN SENSOR message is replaced with a READING
TRENDS message which includes an ABORT option.
Selecting the ABORT softkey stops the recording, accessing or
viewing of additional data into the O
sensors only) is connected to the monitor,
AX
M
XI
AX
M
sensor after 4 to 6 seconds,
XI
AX
M
sensor.
XI
AX
N-600x Operator's Manual
M
sensor
XI
AX
sensor is
Advertisement
Table of Contents
