Nellcor OxiMax N-600X Operator's Manual page 59

Selecting the Pleth View
Selecting the Blip View
N-600x Operator's Manual
The pleth view displays the pleth waveform, %SpO
data. Refer to Principles of Operation on page 171, for a description
of the pleth waveform.
1. With the monitor in the normal monitoring mode, press the
SETUP softkey.
2. Press the VIEW softkey.
3. Press the PLETH softkey. The pleth view displays.
The blip view displays the SpO
larger format for easier viewing.
1. With the monitor in the normal monitoring mode, press the
SETUP softkey.
2. Press the VIEW softkey.
Using the Monitor
, and pulse rate
2
, pulse rate, blip bar, and limits in a
2
51