Table of Contents
Advertisement
Using Monitor Trend Data
O
M
Sensor Type
XI
AX
Selecting the Trend Data Display Scale
76
When an O
M
sensor is connected to the monitor, a "SENSOR
XI
AX
TYPE:..." message is displayed for 4 to 6 seconds at the bottom of the
display. The message identifies the type (model) of O
connected to the monitor. Type is used in the determination of action
messages in the O
M
XI
AX
the first message displayed when an O
the monitor.
The trend scale is the amount of trend data displayed on the screen.
1. With the monitor in the normal monitoring mode, press the
TREND softkey.
2. Press the MONITR softkey.
3. Press the VIEW softkey.
4. Press any of the trend softkeys (DUAL, SPO2, or PULSE). To
select HIST (histogram) or AMP (amplitude), press the NEXT
softkey and then the HIST or AMP softkeys.
sensor message(s) function. This display is
M
sensor is connected to
XI
AX
N-600x Operator's Manual
M
sensor
XI
AX
Advertisement
Table of Contents
