Printing Monitor Trend Data
Software Version
Alarm Limits
Monitor Mode
106
The next data field displays the software level (Version 4.0.0.0) and a
software verification number (CRC: XXXX). Neither of these
numbers should change during normal operation.
Note: The numbers may change if the monitor is serviced and
receives a software upgrade.
The last data field in the top line indicates the upper and the lower
alarm limits for %SpO
and for the pulse rate (PR). In the example
2
above the lower alarm limit for SpO
limit is 100%. Pulse Rate alarm limits are 40 and 170 bpm. The
SatSeconds alarm limit (0SAT-S) displays the SatSeconds alarm
setting. In this example SatSeconds is set to off.
is 85% and the upper alarm
2
N-600x Operator's Manual