Table of Contents
Advertisement
Using the Monitor
Turning the Backlight On or Off
Adjusting the Screen Contrast
Adjusting the Backlight Brightness
50
You can turn off the backlight by pressing the LIGHT softkey and
then pressing OFF.
Note: Any of the following conditions turn on the backlight:
•
pressing any of the softkeys
•
pressing and holding the HELP/CONTRAST button
•
pressing the ALARM SILENCE button
•
any alarm
1. With the monitor in the normal monitoring mode, press and hold
the HELP/CONTRAST button while pressing the ADJUST UP
or ADJUST DOWN button until the desired contrast is obtained.
2. Press the HELP/CONTRAST button to return to the normal
monitoring mode.
1. With the monitor in the normal monitoring mode, press the
LIGHT softkey.
2. Press the ADJUST UP or ADJUST DOWN button until the
desired backlight brightness is obtained.
N-600x Operator's Manual
Advertisement
Table of Contents
