Trend Printout (Graph Mode); Nurse Call; Figure 22: Trend Data Printout (Ascii Mode); Figure 23: Monitor Trend Data Printout (Graph Mode) - Nellcor OXIMAX N-595 Service Manual

Trend Printout
(Graph Mode)

Nurse Call

N-595

Figure 22: Trend Data Printout (ASCII Mode)

The graph mode (Figure 23 and Figure 24) disables all printout functions
except trend data. Trend printouts will be graphical if connected to a serial
printer that supports Epson ESC protocol. To print in the Graph mode the
monitor protocol must be changed to GRAPH. See Figure 19 on page 90.

Figure 23: Monitor Trend Data Printout (Graph Mode)

Figure 24: In-Sensor Event Trend Data Printout (Graph
An RS-232 Nurse Call signal (pins 5 and 11) can be obtained by connecting to
the data port. It is in the form of a positive or negative voltage chosen by the
user.
The remote location will be signaled anytime there is an audible alarm. If the
audible alarm has been set to Off or silenced, the Nurse Call function is also
turned off.
Pin 11 on the data port is the RS-232 Nurse Call signal and pin 5 is ground
(Table 20 on page 106). When there is no audible alarm, the voltage between
Data Port Interface Protocol
Mode)
105