Table of Contents
Advertisement
http://www.mallinckrodt.com/respiratory/resp/Serv_Supp/ProductManuals.html
N-600x Operator's Manual
WARNING: Pulse oximetry readings and pulse signal can be
affected by certain ambient environmental conditions, O
sensor application errors, and certain patient conditions.
WARNING: Do not immerse or wet the O
Caution: The O
M
sensor disconnect error message and
XI
AX
associated alarm indicate that the O
disconnected or the wiring is faulty. Check the O
connection and, if necessary, replace the O
oximetry cable, or both.
Caution: Adhesive O
M
XI
use only. Do not transfer an adhesive sensor containing sensor
trend data from one patient to a second patient. Doing so may
result in data from the first patient being used to evaluate the
second patient.
Note: Physiological conditions, medical procedures, or external
agents that may interfere with the pulse oximeter's ability to detect
and display measurements include dysfunctional hemoglobin, arterial
dyes, low perfusion, dark pigment, and externally applied coloring
agents such as nail polish, dye, or pigmented cream.
A Sensor Accuracy Grid listing all of the O
the N-600x is available on the Internet at:
OXIMAX Sensors and Accessories
M
XI
AX
M
sensor is either
XI
AX
M
XI
AX
sensors are intended for single-patient
AX
M
sensors used with
XI
AX
M
XI
AX
sensor.
M
sensor
XI
AX
sensor, pulse
123
Advertisement
Table of Contents
