Teledyne 400E Instruction Manual page 128

Operating Instructions
GATEWAY IP
ADDRESS
SUBNET
MASK
1
TCP PORT
HOST NAME
1
Do not change the setting for this property unless instructed to by Teledyne
Instruments Customer Service personnel.
128
EDIT key
Configured
disabled
by DHCP
when DHCP
is ON
EDIT key
Configured
disabled
by DHCP
when DHCP
is ON
3000 Editable
M300E Editable
Model 400E Ozone Analyzer
A string of numbers very similar to the
Instrument IP address (e.g.
192.168.76.1.)that is the address of the
computer used by your LAN to access
the Internet.
Also a string of four packets of 1 to 3
numbers each (e.g. 255.255.252.0) that
defines that identifies the LAN the
device is connected to.
All addressable devices and computers
on a LAN must have the same subnet
mask. Any transmissions sent devices
with different assumed to be outside of
the LAN and are routed through
gateway computer onto the Internet.
This number defines the terminal control
port by which the instrument is
addressed by terminal emulation
software, such as Internet or Teledyne
Instruments' APICOM.
The name by which your analyzer will
appear when addressed from other
computers on the LAN or via the
Internet. While the default setting for
all Teledyne Instruments M300E
analyzers is "M300E" the host name
may be changed to fit customer needs.
Instruction Manual
P/N 04316 Rev: B