Table of Contents
Advertisement
12.39
Checking swingarm
12.40
Checking the throttle cable routing
Warning
Danger of accidents The throttle cable can become kinked, trapped or blocked if it is not routed cor-
rectly.
If the throttle cable is kinked, trapped or blocked, the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in throttle cable complies with the specifica-
tion.
–
Check link fork for damage, cracking, and deformation.
»
If the link fork shows signs of damage, cracking, or defor-
mation:
–
Change the link fork.
L03161-10
Preparatory work
–
Remove the seat. (
–
Remove the engine guard. (
–
Remove side cover. (
–
Remove front right fuel tank.
Main work
–
Check the throttle cable routing.
Both throttle cables must be routed side-by-side behind the
handlebars and between the right fork leg and frame toward
the throttle valve body.
»
If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.
A00753-10
Finishing work
–
Install the front right fuel tank.
–
Install the engine guard. (
–
Mount side cover. (
–
Mount the seat. (
SERVICE WORK ON THE CHASSIS 12
Info
Always replace a damaged link fork. Repairing
the link fork is not authorized by KTM.
p. 68)
p. 89)
p. 87)
(
p. 74)
(
p. 76)
p. 89)
p. 88)
p. 68)
83
Advertisement
Table of Contents
