Adjusting The Play Of The Steering Head Bearing (Exc-F Eu/Au/Br, Xcf-W); Adjusting The Play Of The Steering Head Bearing (Exc-F Factory Edition, All Six Days Models) - KTM 350 EXC-F Owner's Manual
Hide thumbs
Also See for 350 EXC-F:
- Repair manual (362 pages) ,
- Owner's manual (136 pages) ,
- Setup instructions (49 pages)
Table of Contents
Advertisement
12
SERVICE WORK ON THE CHASSIS
12.16
Adjusting the play of the steering head bearing
12.17
Adjusting the play of the steering head bearing
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Loosen screws
–
Loosen and retighten screw
Guideline
Screw, top steering head
–
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
–
Tighten screws
Guideline
M00099-10
Screw, top triple clamp
–
Tighten screw
Guideline
Screw, top steering stem
Finishing work
–
Check the steering head bearing play. (
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
(EXC‑F Factory Edition)
–
Release screws
–
Loosen and retighten screw
Guideline
Screw, top steering head
–
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
S00639-10
–
Tighten screws
Guideline
Screw, top triple clamp
–
Mount and tighten screw
Guideline
Screw, top steering stem
(All Six Days models)
–
Release screws
–
Loosen and retighten screw
Guideline
Screw, top steering head
–
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
–
Tighten screws
M00140-10
Guideline
Screw, top triple clamp
(EXC‑F EU/AU/BR, XCF‑W)
and
.
.
.
.
(EXC‑F Factory Edition, All Six Days models)
. Remove screw
.
.
.
M8
. Remove screw
.
.
p. 48)
M20x1.5
12 Nm (8.9 lbf ft)
M8
20 Nm
(14.8 lbf ft)
M8
20 Nm
(14.8 lbf ft)
p. 58)
p. 48)
p. 48)
.
M20x1.5
12 Nm
(8.9 lbf ft)
M8
17 Nm
(12.5 lbf ft)
17 Nm
Loctite
(12.5 lbf ft)
.
M20x1.5
12 Nm
(8.9 lbf ft)
M8
17 Nm
(12.5 lbf ft)
59
®
243™
Advertisement
Table of Contents
