12.14
Adjusting the steering head bearing play
12.15
Adjusting the steering head bearing play
»
If detent positions are detected:
(EXC‑F EU, XCF‑W, EXC‑F BR)
–
Adjust the steering head bearing play.
(All Six Days models)
–
Adjust the steering head bearing play.
–
Check the steering head bearing and replace if neces-
sary.
Finishing work
–
Remove the motorcycle from the lift stand. (
(EXC‑F EU, XCF‑W, EXC‑F BR)
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Loosen screws
–
Loosen and retighten screw
Guideline
Screw, top steering
head
–
Using a plastic hammer, tap lightly on the upper triple clamp
to avoid stresses.
K01336-10
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Tighten screw
Guideline
Screw, top steering
stem
Finishing work
–
Check the steering head bearing play. (
–
Remove the motorcycle from the lift stand. (
(All Six Days models)
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Loosen screws
–
Remove screw
–
Loosen and retighten screw
Guideline
Screw, top steering
head
–
Using a plastic hammer, tap lightly on the upper triple clamp
V01795-10
to avoid stresses.
SERVICE WORK ON THE CHASSIS 12
1
2
and
.
3
.
M20x1.5
12 Nm (8.9 lbf ft)
1
.
M8
20 Nm (14.8 lbf ft)
2
.
M8
20 Nm (14.8 lbf ft)
p. 72)
1
.
2
.
3
.
M20x1.5
12 Nm (8.9 lbf ft)
(
p. 73)
(
p. 73)
p. 63)
p. 63)
p. 63)
p. 63)
73