Table of Contents
Advertisement
SERVICE WORK ON THE CHASSIS
Installing the fork legs
x
10.8
Removing the fork protector
10.9
–
Loosen screws
–
Unscrew screws
B00339-10
–
Position the fork legs.
Info
The upper milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws
B00296-10
–
Tighten screws
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple clamp
B00339-11
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front brake caliper
–
Position the brake line and clamp. Mount and tighten screws
–
Install the front wheel.
B00300-11
x
–
Remove the fork legs.
–
Remove screws
–
Remove the screws on the right fork leg. Remove the fork protector from above.
B00306-10
. Take out the left fork leg.
. Take out the right fork leg.
toward the front.
.
M8
.
M8
M8
(
p. 60)
x
(
p. 33)
x
on the left fork leg. Remove the fork protector from above.
17 Nm
(12.5 lbf ft)
12 Nm (8.9 lbf ft)
.
Loctite
®
243™
25 Nm
(18.4 lbf ft)
.
34
Advertisement
Table of Contents
