Pg Speed Control Card Terminal Blocks; Pg-A2 (For V/F With Pg Feedback Mode Only); Pg-B2 (For Flux Vector Control Mode Only); Pg-D2 (For V/F With Pg Feedback Mode Only) - YASKAWA VARISPEED-616G5 Instruction Manual

3.7.2 PG Speed Control Card Terminal Blocks

The terminal specifications for each PG Speed Control Card are given in the following tables.

PG-A2 (For V/f with PG Feedback Mode Only)

J
Table 3.10
Terminal
TA1
TA2

PG-B2 (For Flux Vector Control Mode Only)

J
Table 3.11
Terminal
TA1 TA1
TA2 TA2
TA3

PG-D2 (For V/f with PG Feedback Mode Only)

J
Table 3.12
Terminal
TA1 TA1
TA2
Note 5 VDC and 12 VDC cannot be used at the same time.
PG-A2 Terminal Specifications
No. Contents
1
Power supply for pulse generator Power supply for pulse generator
2
3
+12 V/open collector switching ter- +12 V/open collector switching ter
minal
4
5
Pulse input terminal Pulse input terminal
6
7
Pulse motor output terminal Pulse motor output terminal
8
(E) Shield connection terminal
PG-B2 Terminal Specifications
No. Contents
1
Power supply for pulse generator Power supply for pulse generator
2
3
A-phase pulse input terminal
4
5
B-phase pulse input terminal
6
1
A phase monitor output terminal A-phase monitor output terminal
2
3
B-phase monitor output terminal B phase monitor output terminal
4
(E)
Shield connection terminal
PG-D2 Terminal Specifications
No. Contents
1
2
Power supply for pulse generator pp y p g
3
4 Pulse input + terminal
5 Pulse input − terminal
6 Common terminal
7 Pulse monitor output + terminal
8 Pulse monitor output − terminal
(E) Shield connection terminal
3 - 25
3.7 Installing and Wiring PG Speed Control Cards
Specifications
12 VDC (±5%), 200 mA max.
0 VDC (GND for power supply)
Terminal for switching between12 V voltage input
and open collector input. For open collector input, and open collector input For open collector input
short across 3 and 4.
H: +4 to 12 V; L: +1 V max. (Maximum response
frequency: 30 kHz)
Pulse input common
12 VDC (+10%), 20 mA max.
Pulse monitor output common

Specifications
12 VDC (±5%), 200 mA max.
0 VDC (GND for power supply)
H: +8 to 12 V
L: +1 V max.
(Maximum response frequency: 30 kHz)
Pulse input common
H: +8 to 12 V
L: +1 V max.
(Maximum response frequency: 30 kHz)
Pulse input common
Open collector output, 24 VDC, 30 mA max.
A-phase monitor output common
Open collector output, 24 VDC, 30 mA max.
B-phase monitor output common

Specifications
12 VDC (±5%), 200 mA max. (see note)
0 VDC (GND for power supply)
5 VDC (±5%), 200 mA max. (see note)
Line driver input (RS 422 level input) Line driver input (RS-422 level input)
Maximum response frequency: 300 kHz

Line driver output (RS-422 level output) Line driver output (RS 422 level output)

3