Option Cards - YASKAWA VARISPEED-616G5 Instruction Manual

Specifications
Model No.
JVOP-95S1
JVOP-95S2
JVOP-96S1
JVOP-96S2
JVOP-96S3
Type
Analog Reference Card
Analog Reference Card
Digital Reference Card
Digital Reference Card
RS-232C/485/422 Interface
Analog Monitor Card
Analog Monitor Card
Pulse Monitor Card
11
Digital Output Card
2C-Relay Output Card
Code No. Frequency Meter Specifications
73041-0905X-01 TRM-45 3 V 1 mA 60/120 Hz
73041-0905X-02 TRM-45 3 V 1 mA 90/180 Hz
73041-0906X-01 DCF-6A 3 V 1 mA 75 Hz
73041-0906X-02 DCF-6A 3 V 1 mA 150 Hz
73041-0906X-03 DCF-6A 3 V 1 mA 220 Hz
The following Option Cards are available.
Table 11.4

Option Cards

Name Code No.
73600-C001X
AI-14U
73600-C002X
AI-14B
73600-C003X
DI-08
73600-C016X
DI-16H2
Card
73600-C015X
SI-K2
73600-D001X
AO-08
73600-D002X
AO-12
73600-D003X
PO-36F
73600-D004X
DO-08
73600-D007X
DO-02C
Descriptions
Used to set high-accuracy, high-resolution analog speed refer-
ences.
S Input signal levels: 0 to +10 VDC (20 k
4 to 20 mA DC (250
S Input resolution: 14 bits (1/16384)
Used to set high-accuracy, high-resolution analog speed refer-
ences.
S Input signal level: 0 to ± 10 VDC (20 k
4 to 20 mA DC (500
S Input resolution: 13 bits + sign (1/8192)
Used to set frequency references in 2-digit BCD or 8-bit binary.
S Input signal: 8 bits binary
2 digits BCD + SIGN signal + SET signal
S Input voltage: +24 V (insulated)
S Input current: 8 mA
Used to set 16-bit digital speed references.
S Input signal: 16 bits binary
4 digits BCD + SIGN signal + SET signal
S Input voltage: +24 V (insulated)
S Input current: 8 mA
Used to set frequency references with 16 or 12 bits (switchable).
Used to convert RS-232C to RS-485 or RS-422.
Supports baud rates up to 9.6 kbps.
SPEC: F and later versions support baud rates up to 19.2 kbps.
Converts analog signals to monitor the Inverter's output status
(output frequency, output current, etc.) to absolute values and
outputs them.
S Output resolution: 8 bits (1/256)
S Output voltage: 0 to +10 V (not insulated)
S Output channels: 2 channels
Output analog signals to monitor the Inverter's output status (out-
put frequency, output current, etc.).
S Output resolution: 11 bits (1/2048) + sign
S Output voltage: − 10 to +10 V (not insulated)
S Output channels: 2 channels
Used to output pulse-train signals according to the output frequen-
cy of the Inverter
S Output pulse: 1F, 6F, 10F, 12F, 36F (F: Output frequency)
S Output voltage: +12 V ± 10% (insulated)
S Output current: 20 mA max.
Outputs isolated digital signals to monitor the Inverters operating
status (alarm signals, zero speed detection, etc.)
S Output form: Photocoupler output, 6 channels
(48 V, 50 mA max.)
Relay contact outputs, 2 channels
250 VAC: 1 A max., DC 30V: 1 A max.)
(
Provides two multi-function outputs (DPDT relay contacts) in
addition to those provided by the Inverter.
11 - 6
Manual No.
TOE-C736-
Ω ) 1 channel
30.13
Ω ) 1 channel
TOE-C736-
Ω)
30.14
Ω
) 3 channels
TOE-C736-
30.15
TOE-C736-40.7
TOE-C736-40.6
TOE-C736-
30.21
TOE-C736-
30.22
TOE-C736-
30.23
TOE-C736-
30.24
TOE-C736-40.8