YASKAWA VARISPEED-616G5 Instruction Manual page 325

Specifications
Model number
CIMR-G5A
Control method
Torque characteris-
tics
Speed control range
Speed control accu-
racy
Speed control re-
sponse
Torque limits
Torque accuracy
Frequency control
range
Frequency accuracy
(temperature charac- (temperature charac
teristics)
Frequency setting Frequency setting
resolution
Output frequency
resolution
Overload capacity
Frequency setting
signal
Acceleration/Decel-
eration time
Braking torque
Motor protection
Instantaneous over-
current protection
Fuse blown protec-
tions
Overload protection
Overvoltage protec-
tion
Undervoltage protec-
tion
Momentary power
loss ridethru
Cooling fin overheat-
ing
Stall prevention
Grounding protection
Charge indicator (in-
ternal LED)
Ambient operating
temperature
Ambient operating
humidity
Storage temperature
Application site
Altitude
Vibration
11
* 1. The maximum applicable motor output is given for a standard 4-pole Yaskawa motor. When selecting the actual motor and
Inverter, be sure that the Inverter's rated current is applicable for the motor's rated current.
* 2. Tuning is sometimes required.
40P4 40P7 41P5 42P2 43P7 45P5
Provided (4 quadrant steps can be changed by constant settings.)
0.01 to 6000.0 s (4 selectable combinations of independent acceleration and deceleration settings)
Stops in one minute at approx. 150% of rated output current.
Stops for 15 ms or more. By selecting the momentary power loss mode, operation can be continued if power is restored within 2 s.
Stall prevention during acceleration, deceleration, or running.
Lit when the main circuit DC voltage is approx. 50 V or more.
10 to 20 Hz, 9.8 m/s
47P5 4011 4015 4018 4022 4030
Sine wave PWM
150% at 1 Hz (150% at 0 r/min with PG).
1: 100 (1: 1000 with PG)*
± 0.2% (25 °C ± 10 °C) ( ± 0.02% with PG)
5 Hz (30 Hz with PG)*
5%
±
0.1 to 400 Hz
Digital references: ± 0.01% (−10 °C to +40 °C)
Analog references: ± 0.1% (25 °C
Digital references: 0.01 Hz
Analog references: 0.03 Hz/60 Hz (11 bits + sign)
0.001 Hz
150% of rated current for one minute
−10 to 10 V, 0 to 10 V, 4 to 20 mA
Approximately 20%
Protection by electronic thermal overload relay.
Stops at approx. 200% of rated output current.
Stops for fuse burnout.
Stops when main-circuit DC voltage is approx. 812 V.
Stops when main-circuit DC voltage is approx. 380 V.
Protection by thermistor.
Protection by electronic circuits. (Overcurrent level)
−10°C to 40 °C (Enclosed wall-mounted type)
−10 °C to 45 °C (Open chassis type)
90% RH max.
−20 °C to +60 °C
Indoor (no corrosive gas, dust, etc.)
1000 m max.
2
{1G} max.; 20 to 50 Hz, 2 m/s
11 - 4
4037 4045 4055 4075 4110 4160
2
*2
2
± 10 °C)
2
{0.2G} max
4185 4220 4300