Removing/Attaching The Digital Operator And; Inverters Of 15 Kw Or Less; Removing The Front Cover - YASKAWA VARISPEED-616G5 Instruction Manual

Handling Inverters

2.5.1 Inverters of 15 kW or Less

2.5 Removing/Attaching the Digital Operator and Front Cover
2.5.1 Inverters of 15 kW or Less
2
Remove the front cover to wire the terminals.
For models of 15 kW or less (both 200 V and 400 V class), do not remove or mount the front cover without
first removing the Digital Operator; otherwise, the Digital Operator may malfunction due to imperfect contact.
Use the following procedures to remove or attach the front cover.
Removing the Digital Operator
J
Press the lever on the side of the Digital Operator in the direction of arrow 1 to unlock the Digital Operator
and lift the Digital Operator in the direction of arrow 2 to remove the Digital Operator as shown in the fol-
lowing illustration.
Front cover
Fig 2.2 Removing the Digital Operator

Removing the Front Cover

J
Press the left and right sides of the front cover in the directions of arrows 1 and lift the bottom of the cover
in the direction of arrow 2 to remove the front cover as shown in the following illustration.
Front cover
1
Fig 2.3
Removing the Front Cover
Mounting the Front Cover
J
After wiring the terminals, mount the front cover to the Inverter by performing in reverse order to the steps
to remove the front cover.
Do not mount the front cover with the Digital Operator attached to the front cover; otherwise, Digital
1.
Operator may malfunction due to imperfect contact.
Insert the tab of the upper part of the front cover into the groove of the Inverter and press the lower
2.
part of the front cover onto the Inverter until the front cover snaps shut.
2
Digital
Operator 1
2
1
2 - 8