Using The Digital Operator - YASKAWA VARISPEED-616G5 Instruction Manual

Setting User Constants

4.1 Using the Digital Operator

4
This section describes the component names and functions of the Digital Operator. The component names
and functions are shown in Figure 4.1 and Key functions are described in Table 4.1.
DRIVE FWD REV REMOTE
SEQ
Frequency Ref
U1−01 = 00.00 HZ
DIGITAL OPERATOR
JVOP-130
LOCAL
MENU ESC
REMOTE
DATA
JOG
ENTER
FWD
REV
RESET
RUN STOP
Fig
4.1 Digital Operator Component Names and Functions
Operation Mode Indicators
REF
DRIVE: Lit when in operation mode.
FWD: Lit when there is a forward run command input.
REV: Lit when there is a reverse run command input.
SEQ: Lit when the run command from the control cir-
cuit terminal is enabled.
REF: Lit when the frequency reference from control
circuit terminals 13 and 14 is enabled.
Data Display
Two-line LCD that displays data for monitoring,
user constants, and set values with 16 characters
per line.
Keys
Execute operations such as setting user constants,
monitoring, JOG, and autotuning.
4 - 2