YASKAWA VARISPEED-616G5 Instruction Manual page 70

Table
4.1
Key
LOCAL
REMOTE
MENU
ESC
JOG
FWD
REV
RESET
DATA
ENTER
RUN
STOP
Note Except in diagrams, Keys are referred to using the Key names listed in the above table.
FWD
REV
RESET
RUN STOP
The RUN and STOP indicators light and blink to indicate operating status.
During DB (initial excitation), RUN blinks and STOP is turned ON.
Fig
4.2
Key Functions
Name
Switches between operation (LOCAL) via the Digital Operator
and control circuit terminal (REMOTE) operation.
LOCAL/REMOTE Key
This Key can be enabled or disabled by setting a user constant
(o2-01).
MENU Key Displays menus.
Returns to the status before the DATA/ENTER Key was
ESC Key
pressed.
Enables jog operation when the VS-616G5 is being operated
JOG Key
from the Digital Operator.
Selects the rotation direction of the motor when the VS-616G5
FWD/REV Key
is being operated from the Digital Operator.
Sets the number of digits for user constant settings.
RESET Key
Also acts as the reset Key when a fault has occurred.
Selects menu items, groups, functions, and user constant
Increment Key
names, and increments set values.
Selects menu items, groups, functions, and user constant
Decrement Key
names, and decrements set values.
Enters menu items, functions, constants, and set values after
DATA/ENTER Key
they are set.
Starts the VS-616G5 operation when the VS-616G5 is in opera-
RUN Key
tion with the Digital Operator.
Stops VS-616G5 operation.
STOP Key
This Key can be enabled or disabled by setting a user constant
(o2-02) when operating from the control circuit terminal.
Inverter output frequency
STOP
Frequency setting
RUN
OP
ST
:
: :
Blinking Not lit
Lit
RUN and STOP Indicators
4 - 3
4.1 Using the Digital Operator
Function
RUN
STOP
4