Setting A User Constant In The Advanced Access Level - YASKAWA VARISPEED-616G5 Instruction Manual

Setting User Constants
4.2.3 User Constant Access Levels
EXAMPLE
A "
4

Setting a User Constant in the Advanced Access Level

The group level will be displayed when the DATA/ENTER Key is pressed at the programming mode dis-
play.
Use the following procedure to set a constant.
Step Key Sequence
1
MENU
2
Press twice.
3
DATA
ENTER
4
5
DATA
ENTER
6
DATA
ENTER
7
DATA
ENTER
8
RESET
Press twice.
9
10
DATA
ENTER
11
ESC
The constant setting in Advanced level (acceleration time change from 10.0 to 20.0 s) has been completed.
Digital Operator Display
G5: Main Menu :
Operation
G5: Main Menu :
Programming
Group b
Application
Group C
Tuning
Function C1
Accel/Decel
Accel Time 1
C1−01 = 10.0 Sec
Accel Time 1
0010.0 Sec
Accel Time 1
0010.0 Sec
Accel Time 1
0020.0 Sec
Entry Accepted
Accel Time 1
C1−01 = 20.0 Sec
Function C1
Accel/Decel
4 - 10
Remarks
Changed to constant reading (function)
level.
Selects the user constant so that the
leading 0 blinks. The blinking digit
can be changed.
Blinking digit moves 2 places to the
right and the "1" blinks.
Changes 1 to 2.
Writes-in the new setting, 20.0 s.
After a few seconds, the Operator dis-
play is as shown on the left.