Shift Tray - Side-To-Side Mechanism - Ricoh D182 Service Training

Shift Tray – Side-to-side Mechanism
Shift HP
Sensor
 Shift motor: Moves the shift roller from side to side, after
the paper eject sensor detects the trailing edge of the
paper
 After the sheet is fed out, the shift roller moves back to
home position
 Detected by the shift HP sensor
Slide 78
 This is basically the same as the B793 finisher.
 The shift roller moves the sheet to one side while it is fed out.
 All sheets of the same set are moved across to the same side, one at a time.
Then, for the next set, the shift roller moves in the opposite direction.
 The shift roller goes back to home position after it feeds out each page.
 Home position is in the middle.
 In shift mode, if the set is one sheet, the motor moves every sheet. In this case,
the output speed of the finisher is reduced to 60%.
Paper Eject
Shift
Sensor
Motor
Shift Roller
78
OR-C2 Training