Actions
Step 4
Remove, and then reinstall the fuser.
Does the problem remain?
Step 5
Replace the fuser. See
Does the problem remain?
Step 6
a
Remove the right cover. See
page
420.
b
Reseat the connections on the LVPS.
Does the problem remain?
Step 7
Replace the LVPS. See
Does the problem remain?
Toner specks appear on prints check
Note: Before performing this print quality check, go to the control panel home screen and navigate to
Settings > Troubleshooting > Print Quality Test Pages, and then perform the initial print quality check.
See
"Initial print quality check" on page
"Fuser removal" on page
"Right cover removal" on
"LVPS removal" on page
44.
Diagnostics and troubleshooting
Yes
Go to step 5.
Go to step 6.
452.
Go to step 7.
Contact the next
level of support.
414.
76
4064
No
The problem is
solved.
The problem is
solved.
The problem is
solved.
The problem is
solved.