Shpf Bin Link Tension Spring Removal - Lexmark M52 Series Service Manual

SHPF bin link tension spring removal

1
Remove the staple, hole punch finisher left cover. See
page 699.
2
Remove the staple, hole punch finisher right cover. See
on page 701.
3
Unhook the tension spring (A) from the left side, and then remove it.
4
Unhook the tension spring (B) from the right side, and then remove it.
"Staple, hole punch finisher left cover removal" on
"Staple, hole punch finisher right cover removal"
Parts removal
732
4064