Mailbox Upper Interface Cable Removal; Motor (Mailbox Diverter) Removal - Lexmark M52 Series Service Manual

Mailbox upper interface cable removal

1
Remove the mailbox top cover. See
2
Remove the mailbox left cover. See
3
Disconnect the upper interface cable J1B from the controller board.
4
Crimp both connector pins, using pliers to make them fit the pin holes. Push the connector off its slot.
5
Remove the upper interface cable.

Motor (mailbox diverter) removal

1
Remove the mailbox top cover. See
2
Remove the mailbox left cover. See
"Mailbox top cover removal" on page
"Mailbox left cover removal" on page
"Mailbox top cover removal" on page
"Mailbox left cover removal" on page
Parts removal
672
648,
654.
648.
654.
4064