Paper Feeder Removal; Motor (Redrive) Removal - Lexmark M52 Series Service Manual

Paper feeder removal

1
Remove tray 1, and then remove the pick roller. See
2
Remove the top cover. See
3
Remove the left cover. See
4
Release the cable holder (A), and then disconnect the cable (B).
5
Remove the three screws (C), and then remove the paper feeder.

Motor (redrive) removal

1
Remove the top cover. See
2
Remove the left cover. See
3
Remove the two screws (A), and then release the motor.
Note: If the top cover is not removed yet, then the motor cannot be released.
"Top cover removal" on page
"Left cover removal" on page
"Top cover removal" on page
"Left cover removal" on page
Parts removal
417
"Pick roller removal" on page
455.
409.
455.
409.
4064
465.