Lexmark M52 Series Service Manual page 121

Action
Step 3
Check if tray 1 is overfilled.
Is the tray overfilled?
Step 4
Remove the excess paper from the tray.
Does the problem remain?
Step 5
Check tray 1 for crumpled, damaged, or deformed paper.
Are the sheets of paper on the tray still in good condition?
Step 6
Replace the affected sheets.
Does the problem remain?
Step 7
Check the tray 1 pick roller for proper installation.
Note: Make sure that the pick roller is fully pressed to its feeder
shaft. A click will be heard indicating a proper engagement
between the latches and the shaft.
Is the pick roller properly installed?
Step 8
Reinstall the pick roller.
Does the problem remain?
Step 9
Check the tray 1 pick roller and separator pad for excess wear,
damage, and contamination.
Is the pick roller and separator pad free of excess wear, damage,
and contamination?
Step 10
Replace the affected pick roller or separator pad. See
removal" on page 465.
Does the problem remain?
Step 11
Check the tray 1 tray insert for damage.
Is the tray insert free of damage?
"Pick roller
Diagnostics and troubleshooting
121
Yes No
Go to step 4. Go to step 5.
Go to step 5. The problem is
solved.
Go to step 7. Go to step 6.
Go to step 7. The problem is
solved.
Go to step 9. Go to step 8.
Go to step 9. The problem is
solved.
Go to step 11. Go to step 10.
Go to step 11. The problem is
solved.
Go to step 13. Go to step 12.
4064